VER010-X PCIE Riser 1X to 16X Graphics Extension Card

Description

Please Note ! 1. This extension cord is suitable for motherboards with PCI-E slots. Please plug in the floppy drive power cord when using it. When inserting or unplugging the PCI-E extension cable, make sure that the computer has no power.

2. The matching cable is customized, please do not use other cables! 3. Be sure to recognize the direction when plugging in, and don’t plug it in reverse or off-position to prevent the device from being burned; when plugging in, hold the socket of the device before plugging in, avoiding excessive force to break the socket pin.

4. It is recommended to use the old flat cable for dual-core graphics cards and 16X motherboards.

Features: 1. Very suitable for installing Ethereum mining equipment. 2. No driver is required.

3. The 4 holes on the riser card are used for installation.

4. LED indicators and fuses are used on the circuit board.

5. The graphics card power supply adopts 8 solid capacitors to make the graphics card power supply more stable and safe.

6. 4PIN+SATA15PIN+6PIN interface makes the graphics card power independent of the motherboard to reduce the load on the motherboard. This reduces the burden on the motherboard when connecting multiple graphics cards.

7. The PCI-E connector uses multi-layer shielded wire, which can be connected to a maximum of 3M without attenuating the signal.

8. The USB cable is soft and stable, easy to route, and the graphics card can be placed at will.

9. The slot is equipped with a fixed buckle, which is more convenient to remove the graphics card and fix the graphics card, and the graphics card will not fall off from the slot.

Package: 1* PCI-E riser card

1* PCI-E 1X card

1* 60cm USB 3.0 cable